SAFETY DATA SHEET
 

 

 

 

C-Systems Epoxy Tixo component B Rev. 3 di march 2007 - n° batch 066-07
 

1. DESIGNATION OF PRODUCT AND COMPANY
Trade name C-Systems EPOXY TIXO component B
Chemical description: Polyaminoamide compound
Supplier: Cecchi Gustavo & C., Via Coppino 253, Viareggio 55049 (LU) -
tel 0039 0584/383694 fax 0039 0584/395182 www.cecchi.it - info@cecchi.it

2. COMPOSITION/INFORMATION ON INGREDIENTS
Hazardous components under the EEC directive 67/548 or components for which European Community exposure values exists:
< 10% 3,6-diazaoctaneethylenediamin
N.67/548/EEC: 612-059-00-5 CAS: 112-24-3 EINECS: 203-950-6
C Corrosive
R21 Harmful in contact with skin.
R34 Causes burns.
R43 May cause sensitization by skin contact.
R52/53 Harmful to aquatic organisms, may cause long-term adverse effects in the aquatic environment.

3. HAZARDS IDENTIFICATION
If brought into contact with the skin, the product causes appreciable inflammation, with erythema, scabs, and oedema.
If brought into contact with the eyes, the product causes serious eye injury, such as opacity of the cornea or lesions to the iris.
If brought into contact with the skin, the product may cause sensitisation of the skin.

4. FIRST-AID MEASURES
Contact with skin:
Immediately take off all contaminated clothing.
Remove the product with a cloth or absorbent paper. Do not use solvents.
Wash with plenty of water and soap.
Contact with eyes:
Wash immediately and thoroughly with running water, keeping eyelids raised, for at least 10 minutes. Following this, protect the eyes with sterile gauze or a clean, dry, handkerchief. Seek medical advise.
Do not use eyewash or ointment of any kind before obtaining an examination or advice from an ophthalmologist.
Swallowing:
The induction of vomiting and the administration of oral drugs must be carried out only upon medical council.
Inhalation:
Ventilate the premises. The patient is to be removed immediately from the premises contaminated and made to rest in a well ventilated area. Should the patient feel unwell, consult a physician.

5. FIRE FIGHTING MEASURES
Recommended extinguishers:
CO2, Foam, Chemical powders or sand. Use water based extinguishing media with caution.
Extinguishers not to be used:
None in particular.
Risks arising from combustion:
Avoid inhaling the fumes. Incomplete combustion releases toxic gases.
Protective equipment:
Use protection for the airways.

6. MEASURES IN CASE OF ACCIDENTAL RELEASE
Measures for personal safety:
Use a mask, gloves and protective clothing.
Environmental measures:
Limit leakages with earth or sand.
If the product has flown off into a water course, into the drainage system, or has contaminated the ground or vegetation, notify the responsible authorities.
Cleaning methods:
Rapidly collect the product. To do so, wear a mask and protective clothing.
If the product is in a liquid form, stop it from entering the drainage system.
Recover the product for re-use if possible, or for elimination in compliance with waste disposal regulations in force. The product might, where appropriate, be absorbed by inert material.
After the product has been removed, rinse the involved area and materials with water that must be disposed in compliance with regulations in force.

7. HANDLING AND STORAGE
Handling precautions:
Avoid contact with and inhalation of vapours and/or dusts. See also paragraph 8 below.
Do not eat or drink or smoke while working. Wash hands before breaks and at the end of work. Mantain a sufficient personal care.
Incompatible materials:
None in particular.
Storage conditions:
Instructions regarding storage facilities:
Avoid exposition to low temperature (T > 15°C).

8. EXPOSURE CONTROL/PERSONAL PROTECTION
Precautionary measures:
Provide adequate ventilation to the areas where the product is stored and/or handled.
Respiratory protection:
Not needed for normal use.
Protection for hands:
Use protective gloves.
Eye protection:
Safety goggles.
Protection for skin:
Use clothing that provides complete protection to the skin.
Available Exposure Limits (ACGIH) for substances of section 2: None

9. PHYSICAL AND CHEMICAL PROPERTIES
Appearance and colour: Amber liquid
Odour: Light
Flash point: > 150 °C
Explosive properties: na
Combustion-related properties: na
Specific gravity: 1,00 gr/ml (25°C)
Solubility in water: Insoluble
Partition coefficient (n-octanol/H20) : nd
Dynamic viscosity: 160.000 - 240.000 mPa.s (25°C)

10. STABILITY AND REACTIVITY
Conditions to avoid:
Stable under normal conditions.
Substances to avoid:
None in particular.
Hazardous decomposition products:
It may generate toxic gases on contact with oxidising mineral acids, and powerful oxidising agents.
It may catch fire on contact with powerful oxidising agents.
Upon combustion CO, CO2, NH3, NOX and other nitrogen containing compounds are formed.

11. TOXICOLOGICAL INFORMATION
No toxicological data related to the preparation are available.
When available, the toxicological information relating to the main components are listed below.
3,6-diazaoctaneethylenediamin
LD50 (oral): > 2.500 mg/kg (rat)
LD50 (dermal): > 500 mg/kg (rabbit)
Studies carried out by manufactures have observed that a particular ethyleneamine, DETA (diethylenetriamine), has a very high acute toxicity by inhalation of aerosols. The NOEL (no effect level) has been established at concentrations <0,07 mg/l (4 h). It can be assumed that same effects are applicable to other ethyleneamines.
Even if the formation of aerosols is rare in industrial applications of ethyleneamines, it is necessary to avoid inhalation by good ventilation and using masks to protect respiratory system.

12. ECOLOGICAL INFORMATION
Adopt sound working practices, so that the product is not released into the environment.
When available, the toxicological information relating to the main components are listed below.
3,6-diazaoctaneethylenediamin
Not readily biodegradable.
Acute toxicity LC/EC/IC 50 = 20-600 mg/l.

13. DISPOSAL CONSIDERATIONS
Recover if possible. In doing so, comply with the local and national regulations currently in force.

14. TRANSPORT INFORMATION
This product is not classified as dangerous under transport regulations.

15. REGULATORY INFORMATION
European Directives (Classification and Labelling):
Symbols:
Xi Irritant
R Phrases:
R38 Irritating to skin.
R41 Risk of serious damage to eyes.
R43 May cause sensitization by skin contact.
S Phrases:
S26 In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
S37/39 Wear suitable gloves and eye/face protection.
S61 Avoid release to the environment. Refer to special instructions/Safety data sheets.
Where applicable, refer to the following regulatory provisions :
Directive 98/24/CE
Directive 91/156/EC; 91/689/EC; 94/62/EC (waste disposal).
Directive 96/82/EC (Seveso Directive).

16. OTHER INFORMATION
Main bibliographic sources:
NIOSH - Registry of toxic effects of chemical substances
ACGIH - Threshold Limit Values (2002)
This MSDS cancels and replaces any previous releases.
The information contained herein is based on what we believe to be reliable data, but it is presented without guarantee or warranty by our part and Cecchi Gustavo & C. disclaims any liability incurred from the use thereof.
Nothing contained herein is to be construed as recommendations for use in violation of any existing patent, foreign or domestic, or of applicable laws and regulations.
Apply to Cecchi Gustavo & C. for further information about the product and its use.
It is recommended to pass on this MSDS to customers and handlers.