|
1. IDENTIFICAZIONE DEL PRODOTTO E DELLA SOCIETA’
Nome commerciale: C-SYSTEMS 10 10 UV PROTECTION component A
Tipo di prodotto ed impiego: Epoxy resin based compound
Nome del fornitore: Cecchi Gustavo & C. s.a.s.
N° telefonico di chiamata urgente: 0584/383694
2. HAZARDS IDENTIFICATION
When brought into contact with the eyes, the product causes irritation that may last for over 24
hours, and upon brought into contact with the skin it causes inflammation if it is not removed
immediately.
If brought into contact with the skin, the product may cause sensitisation of the skin.
This product is a threat to the environment; it is toxic for aquatic organisms following acute
exposure.
In the long term this product may have negative effects on the aquatic environment, because it is
not easily biodegradable and/or bioaccumulable.
3. COMPOSITION/INFORMATION ON INGREDIENTS
Hazardous components under the EEC directive 67/548 or components for which European
Community exposure values exists:
75% - 100% epoxy resin (number average molecular weight <= 700)
N.67/548/EEC: 603-074-00-8 CAS: 25068-38-6 EC: 500-033-5
Xi,N; R36/38-43-51-53
10% - 20% 1,4-bis(2,3 epoxypropoxy)butane
N.67/548/EEC: 603-072-00-7 CAS: 2425-79-8 EC: 219-371-7
Xn,Xi; R20/21-36/38-43
5% - 10% Epoxy resin. Reaction productfrom Bisphenol F-Epichlorohydrin.
CAS: 28064-14-4
Xi,N; R51-53-36/38-43
< 5% oxirane, mono[(C12-14-alkyloxy)methyl] derivs.
N.67/548/EEC: 603-103-00-4 CAS: 68609-97-2 EC: 271-846-8
Xi; R38-43
4. FIRST-AID MEASURES
Contact with skin:
Immediately take off all contaminated clothing.
Remove the product with a cloth or absorbent paper. Do not use solvents.
Wash with plenty of water and soap.
Contact with eyes:
Wash immediately with water for at least 10 minutes.
Seek medical advice if irritation persists.
Swallowing:
The induction of vomiting and the administration of oral drugs must be carried out only upon
medical council.
Inhalation:
Ventilate the premises. The patient is to be removed immediately from the premises
contaminated and made to rest in a well ventilated area. Should the patient feel unwell,
consult a physician.
5. FIRE FIGHTING MEASURES
Recommended extinguishers:
CO2, Foam, Chemical powders or sand. Use water based extinguishing media with caution.
Extinguishers not to be used:
None in particular.
Risks arising from combustion:
Avoid inhaling the fumes. Incomplete combustion releases toxic gases.
Protective equipment:
Use protection for the airways.
6. MEASURES IN CASE OF ACCIDENTAL RELEASE
Measures for personal safety:
Use a mask, gloves and protective clothing.
Environmental measures:
Limit leakages with earth or sand.
If the product has flown off into a water course, into the drainage system, or has contaminated
the ground or vegetation, notify the responsible authorities.
Cleaning methods:
Rapidly collect the product. To do so, wear a mask and protective clothing.
If the product is in a liquid form, stop it from entering the drainage system.
Recover the product for re-use if possible, or for elimination in compliance with waste disposal
regulations in force. The product might, where appropriate, be absorbed by inert material.
After the product has been removed, rinse the involved area and materials with water that
must be disposed in compliance with regulations in force.
7. HANDLING AND STORAGE
Handling precautions:
Avoid contact with and inhalation of vapours and/or dusts. See also paragraph 8 below.
Do not eat or drink or smoke while working. Wash hands before breaks and at the end of
work. Mantain a sufficient personal care.
Incompatible materials:
Keep away from amines, strong bases, acids and strong oxidants.
Storage conditions:
Keep in a dry place, in the original containers tightly closed and avoid heat sources.
Instructions regarding storage facilities:
Avoid exposition to low temperature (T > 15°C).
8. EXPOSURE CONTROL/PERSONAL PROTECTION
Precautionary measures:
Provide adequate ventilation to the areas where the product is stored and/or handled.
Respiratory protection:
Required where ventilation/aspiration is insufficient or exposure is prolonged, or for
applications in which the product is sprayed or heated.
Required in case of machining or applications that release dusts.
Protection for hands:
Use protective gloves.
For an extended exposure of the product, wear nitrile/neoprene gloves.
Eye protection:
Required in case of machining or applications that release dusts.
Safety goggles.
Protection for skin:
Use clothing that provides complete protection to the skin.
Available Exposure Limits (ACGIH) for substances of section 2:
None
9. PHYSICAL AND CHEMICAL PROPERTIES
Appearance and colour: Pale yellow liquid
Odour: Light
pH: n.d.
Melting point: N.A.
Boiling point: > 200 °C
Flash point: > 150 °C (DIN 51758)
Explosive properties: n.a
Combustion-related properties: n.a
Vapour pressure: n.d.
Specific gravity ASTM D 1475: 1.15 gr/ml (25°C)
Solubility in water: Insoluble
Lipid solubility: N.A.
Partition coefficient (n-octanol/H20) : n.d.
Dynamic viscosity EN13702-2: 700 - 1100 mPa.s (25°C)
Vapour density: N.A.
10. STABILITY AND REACTIVITY
Conditions to avoid:
Stable under normal conditions.
Substances to avoid:
The product reacts exothermically with amines, Lewis acids and mercaptanes.
Hazardous decomposition products:
It may catch fire on contact with powerful oxidising agents.
Upon incomplete combustion carbon monoxide is formed.
11. TOXICOLOGICAL INFORMATION
No toxicological data related to the preparation are available.
When available, the toxicological information relating to the main components are listed below.
epoxy resin (number average molecular weight <= 700)
LD50 (oral): > 2.000 mg/kg (rat)
LD50 (dermal): > 2.000 mg/kg (rabbit)
Epoxy resin. Reaction productfrom Bisphenol F-Epichlorohydrin.
LD50 (oral): > 2.000 mg/kg (rat)
LD50 (dermal): > 2.000 mg/kg (rabbit)
12. ECOLOGICAL INFORMATION
Adopt sound working practices, so that the product is not released into the environment.
When available, the toxicological information relating to the main components are listed below.
epoxy resin (number average molecular weight <= 700)
Sinks in water. Expected to be not readily biodegradable. Has the potential to bioaccumulate.
If product enters soil, it will be mobile and may contaminate groundwater.
Acute toxicity LC/EC/IC 50 = 1-10 mg/l
Epoxy resin. Reaction productfrom Bisphenol F-Epichlorohydrin.
Sinks in water. Expected to be not readily biodegradable. Has the potential to bioaccumulate.
If product enters soil, it will be mobile and may contaminate groundwater.
Acute toxicity LC/EC/IC 50 = 1-10 mg/l
13. DISPOSAL CONSIDERATIONS
Recover if possible. In doing so, comply with the local and national regulations currently in force.
14. TRANSPORT INFORMATION
UN number: 3082
Proper shipping name: SOSTANZA PERICOLOSA PER L'AMBIENTE, LIQUIDA, NAS
(Resina epossidica)/ENVIRONMENTALLY HAZARDOUS
SUBSTANCE, LIQUID, NOS (Epoxy resin)
Road/Rail (ADR/RID): 9 III
Sea (IMDG): 9 III
Sea (EmS): F-A , S-F
Air (ICAO/IATA): 9 III
15. REGULATORY INFORMATION
Council Directive 67/548/EEC (Classification, packaging and labelling of dangerous substances)
and subsequent amendments. Commmission Directive 1999/45/EC (Classification, packaging and
labelling of dangerous preparation) and subsequent amendments. Commission Directive 98/24/EC
(Protection of the health and safety of workers from the risk related to chemical agent). Commission
Directive 2000/39/EC (Occupational exposure limit values). Regulation (EC) No 1907/2006
(REACH).
Symbols:
Xi Irritant
N Dangerous for the environment
R Phrases:
R36/38 Irritating to eyes and skin.
R43 May cause sensitization by skin contact.
R51/53 Toxic to aquatic organisms, may cause long-term adverse effects in the aquatic
environment.
S Phrases:
S24 Avoid contact with skin.
S28 After contact with skin, wash immediately with plenty of soaped water.
S37/39 Wear suitable gloves and eye/face protection.
S61 Avoid release to the environment. Refer to special instructions/Safety data sheets.
Contents:
epoxy resin (number average molecular weight <= 700)
Special Provisions:
Contains epoxy constituents. See information supplied by the manufacturer.
Where applicable, refer to the following regulatory provisions :
Directive 98/24/CE
Directive 91/156/EC; 91/689/EC; 94/62/EC (waste disposal).
Activities linked to risks of serious accidents
16. OTHER INFORMATION
R20/21 Harmful by inhalation and in contact with skin.
R36/38 Irritating to eyes and skin.
R38 Irritating to skin.
R43 May cause sensitization by skin contact.
R51/53 Toxic to aquatic organisms, may cause long-term adverse effects in the aquatic
environment.
Main bibliographic sources:
NIOSH - Registry of toxic effects of chemical substances
I.N.R.S. - Fiche Toxicologique
ACGIH - Threshold Limit Values
The information contained herein is based on our state of knowledge at the above-specified date. It
refers solely to the product indicated and constitutes no guarantee of particular quality.
It is the duty of the user to ensure that this information is appropriate and complete with respect to
the specific intended use.
This MSDS cancels and replaces any previous releases. |
