For any type of job, repairing as well as restoring, the best present for you and your boat is this kit to become a super expert and appreciate the strong performances of the epoxy system C-Systems. With this kit you will be able to carry out a multitude of jobs solving not only on your wooden or fibreglass boat, but also in many repair, filling as well as bonding jobs, which have to be carried out in the house, garden, etc. In this kit the products are offered at a special trial price: a further reason to make use of C-Systems' products.
Furthermore, upon request it is possible to receive the VHS tape nos. 1 with 60 minutes about many jobs and application examples as well as osmosis repair.

A pack contains:

1 kg C-Systems' 10 10 CFS resin A
1/2 kg C-Systems' 10 10 CFS catalyst B
1 pair of micro-pumps to always have the right quantities
3 reusable plastic boxes
1 0.5 litre pack of natural Microfibres
1 0.5 litre pack of Thickener nos. 2
1 0.5 litre pack of Microfiller Powder
1 100 g pack of mineral Microfibres
2 calibrated mixing sticks 30 cm
3 small disposable brushes
10 disposable gloves
1 booklet about our product range and its usage

 

All this at euro 73.00 or 79.00 (VAT excluded) with VHS videotape nos. 1 containing detailed explanations and advise about the use.

 

How much and what is needed for the hull osmosis or to remake the wooden hull?

This example is referred to a surface of 10 square metres.
(Note: The positions with an asterisk * are possible alternatives to each other or depending on the hull roughness or the size of the bubbles one or the other type is to be used whilst the final price, according to the present price list, includes all listed items and can therefore be reduced remarkably.

 

Raw materials

C-Systems' 10 10 CFS resin or
C-Systems 10 2 6 kg
Natural Microfibres* 0.6 kg
Mineral Microfibres* 1 kg
Microfiller Powder* 150 g
Anti-osmosis additive A 20* 0.6 kg
C-Epoxy Light Filler* 6 l.
Nautilus Epoxy Primer 1 l.
Nautilus Antifouling (long-life or S.P.) 2 l.

 

Consumables

Pair of micro-pumps* x 1
Plastic bowl* x 1
Kit boxes* (3) x 1
Mixing sticks x 10
Handle and small rollers x 6
Toothed spatula* x 1
Smooth spatula kit* (4) x 1
Disposable gloves x 30

 
The total is euro 569.00 (VAT excluded) The total is euro 72.00 (VAT excluded)

When polishing a wooden or fibreglass hull the calculation of the filler quantity refers to a medium thickness equal to 500 microns (1/2 mm). For a larger thickness we have to take into account a further 6 l. of filler for any further 500 microns.
The items with an asterisk can be used, if properly applied, for several jobs, therefore the price remains the same also for larger surfaces.